How to increase the heat exchange speed by increasing the fin surface of the heat exchanger
The finned tube heat exchanger is sealed by four plates: top, bottom, left, and right to ensure the overall structure size and fixation, and facilitate the docking of the finned tube heat exchanger at a later stage. We select heat transfer foundation tubes based on materials and sizes. The tube density of the finned tube heat exchanger determines which heat transfer base tube we choose, as well as the chemical characteristics of the hot and cold working fluids. We reselected the material of the heat exchange substrate.
Because the external area of the heat transfer tube is small, and in order to increase the heat exchange rate between the two working fluids, we need to increase the heat transfer from the surface angle. Finned tubes are our first choice; , Need to be connected together on the side. Finned tube heat exchangers must be uniformly connected to ensure the fluidity of the working fluid.
The finned tube heat exchanger interface is usually designed to enter and exit from the same side, mainly to facilitate on-site installation and subsequent maintenance to achieve access on the same side. Early planning.